- Heavy-Duty Switch with Anti-Fatigue Double
- 15 ft Power Cord
- Built in G.F.C.I.
- Easy Adjustable Base Plate
Easy to install contour blade adapter with installation wrenches.
- Direct Port Injection Ball Valve Water
- 15 ft High Pressure Water Hose
- Solid Brass Hose Bib
- Cutting Depth 1-5/8’‘
Blade Diameter: 4 - 5” / 110 - 125 mm
Max. Cut Depth: 1 - 5/8''
Arbor Diameter: 20 mm
The 125 A stone cutting saw: The saw is designed for the rigorous day-to-day use of a fabrication shop. It is engineered with high-quality, top-of-the-line components. The saw is made to last with its 2.2 horsepower - 1650 watts of power to cut through 3 cm or 1-1/4” material with ease, making it the strongest saw in its class.
Stainless steel contour blade adapter: The saw is designed to easily change between straight or contour blades, making it ideal for round bowl cutting.
Direct port injection water feed system with 15 feet water hose: The direct port injection system allows for complete water saturation of the blade within the shroud itself, eliminating the plastic fork system. This also gives the operator improved visibility and better access for installation and removal of the blade, especially when installing a contour blade. It has 15 feet of braided reinforced polyurethane ether-based flexible hose that has a working pressure of 220 PSI. The brass hose bib and the full port solid brass ball valve make it a high quality, bulletproof completely assembled water feed that allows the operator to use line pressure with no need for any pressure regulator.
Heavy-duty four bolt flange mounted sealed bearing system: This bearing system is designed for high production usage. The precision bearing is sealed to keep out dust, dirt and moisture which extends the life of the bearing.
- 2.2 Horsepower - 1650 Watt Motor
- Heavy-Duty, Long-Lasting Bearings
- High Temperature Resistant Internal Windings
- Easy to Install Contour Blade Adapter
- Includes scratch resistant base plate padding
High visibility open style base plate with fast action slide lock feature to control depth of cut: The saw base plate has no obstructions in front or around the blade which gives the operator greater visibility for tight tolerance cuts. The fast action slide lock allows the operator to adjust the depth of the cut great for plunge cutting and rodding.
G.F.C.I. protection with 15 feet of power cord: The G.F.C.I. protection allows for safe operation in wet conditions with its 15 feet of 14/3 AWG SJTW heavy-duty power cable. It gives the operator plenty of line to plug directly into a receptacle without having to use an additional extension cord that may act as a voltage drop, reducing power to the saw.
Solid brass hose bib with 15 feet of high-pressure 220 psI water hose pre-assembled to the saw.
Heavy-duty switch with two finger anti-fatigue trigger: The trigger houses a double pole switch made with heavy-duty metal contacts designed for high usage. Also, the double finger trigger will give the operator ease and comfort, especially during continuous usage.
2.2 horsepower -1650 watt motor with high temperature resistant internal windings: The saw power plant is a 2.2 horsepower - 1650 watt motor which gives the operator extra power to cut through thick materials with no effort and without having to step cut with a contour blade. With this extra power, the operator will never feel underpowered during the cut even when using rodding or curved contour blades. The windings are heat resistant up to 220 degrees, helping to prevent thermal meltdown which would create short circuiting and motor failure. This also help to extend the life of the saw during continuous usage.
Get the FAB-125 A. Stone Cutter at
With 2.2 Horsepower -
G.F.I.C . with 15 feet of
14/3 AWG power cord
2.2 HP - 1650 W
No Load Speed: 12000 r/min
Rated Voltage: 110-120 V AC
Built Tough For
Copyright © Fabricators for fabricators LLC. All Rights Reserved.